Vinten V4045-4980 Manuel d'utilisateur télécharger pdf (Page 12)

Operators guide

*MMVNJOBUFEMFWFMCVCCMF

Levelling the head is achieved using the level bubble (15) that can be illuminated when setting

up at locations with low lighting levels. In situations of low light, the level bubble can be

illuminated by pressing the push button (12). The bubble will be illuminated for 15 seconds. The

battery for the illuminated bubble is contained within a battery compartment (10) located under

the platform.

1BOBOE5JMUESBH

Both pan and tilt mechanisms incorporate the patented Vinten lubricated friction (LF) system to

ensure smooth movement of the camera about these axes. The pan and tilt drag is adjusted

using the pan drag adjustment knob (13) and tilt drag adjustment knob (5). The whip-pan facility

is unaffected by the pan drag setting.

1BOBOE5JMUCSBLFT

Both pan and tilt brakes allow each axis on the head to be locked at any chosen position. The

pan brake lever (4) and tilt brake lever (3) are located on the left-hand side of the head.

1BOCBS

Pan bar mounting points (16) are located at the rear of the head on either side of the camera

mounting platform. The pan bar (8) is attached using a pan bar clamp (7), with angular

adjustment available on the mount serrations. A fixed pan bar is supplied with an option to fit

another pan bar if required.

$BNFSBNPVOUJOH

The camera is attached to the head using a slide plate (2) that is attached to the camera and

then loaded from the rear of the platform (9) and secured in position by the slide plate clamp (6).

The clamp prevents inadvertent removal of the camera from the head. The slide plate (2) is

supplied with a 1/4 in. screw and pin assembly (1) to suit most lightweight digital video cameras.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Pas de commentaire

Vinten V4045-4980 Manuel d'utilisateur Page 12